David Clark 9800 Series Manual de instalación descargar pdf (Pagina 39)

9532P-62 (03-11) B

ppendix B

P/N 40688G-47 Waterproof Fuse Kit

Installation Instructions

arts/Tools Required

• 1/8-inch diameter heat shrink tubing

•

Wire strippers

• Crimp tool (Radio Shack P/N 64-409 or equivalent)

• Crimp terminals

• 2-Amp fuse kit

ocedure

. Using a heat gun, install 1/8" diameter heat shrink tubing* over one end of the 4" red wire

(supplied). Install the second piece of 1/8" diameter heat shrink tubing over the red wire on

the C98-20PW Power Cable.

2. Thread red wire of power cord with heat shrink tubing* into one end of fuse holder.

3. Thread the heat shrink end of the 4-inch red wire into other end of fuse holder.

4. Strip insulation on both wires 1/4 inch.

5. Crimp fuse clips to both wires. (Recommended crimp tool Radio Shack No. 64-409 or

equivalent).

6. Insert 2 amp fuse.

7. Snap two halves of housing together.

igure B1: Proper assembly of Fuse Holder Kit (40688G-47)

* Note: The heat shrink tubing is

ecessary in order to provide

weather tightness.

1 2 ... 34 35 36 37 38 39 40 41 42 43

Sin comentarios

David Clark 9800 Series Manual de instalación Pagina 39